Earth SAT Data
Home › Technical Guides › SAR & Radar
SAR & Radar

SAR Interferometry (InSAR) for Ground Deformation Monitoring

Measure millimeter-level ground movement across mines, aquifers, and infrastructure by exploiting coherent radar phase differences.

How Radar Phase Captures Millimeter Surface Movement

Single Look Complex (SLC) SAR products store fractional wave phase alongside amplitude. Subtracting phase across repeat passes cancels static terrain and exposes Line-of-Sight (LOS) surface motion down to fractions of the wavelength.

In C-band (56 mm), one full 2-pi fringe equals 28 mm of two-way LOS shift. Removing orbital and topographic phase via a DEM yields Differential InSAR (D-InSAR) displacement.

  • Phase sensitivity equals lambda / (4 * pi) meters per radian.
  • Single passes measure 1D Line-of-Sight motion; dual orbits separate vertical vs east-west.
  • Must use SLC products; GRD imagery discards all phase data.

Coherence, Temporal Decorrelation, and PS-InSAR

Interferometry requires phase coherence (0 to 1). Concrete, bedrock, and pipelines stay coherent for years, whereas crops or snow decorrelate quickly. Multi-temporal PS-InSAR and SBAS stack 20+ SLC scenes to remove atmospheric water-vapor delays, reaching 1–2 mm/year precision.

  • 6–12 day revisit intervals preserve coherence over semi-vegetated terrain.
  • L-band radar maintains coherence beneath forest foliage better than X- or C-band.
  • Keep perpendicular baselines well below the critical threshold.

Phase Unwrapping Limits and Rapid Displacement Aliasing

Wrapped phase repeats every 2-pi radians like unlabeled contours. If neighboring pixels shift faster than lambda / 4 (14 mm in C-band) between passes, fringes alias and unwrapping fails—requiring shorter revisit or longer L-band wavelengths.

Operational Monitoring for Tailings Dams and Pipelines

Engineering teams pair free 6–12 day Sentinel-1 regional stacks with targeted 3 m X-band spotlight stacks over tailings dams, tunnels, and coastal aquifers.

InSAR Wavelength Comparison for Deformation Monitoring

SAR BandWavelength (lambda)Half-Wave Fringe (lambda/2)Coherence & Monitoring Trade-Off
X-Band (TerraSAR-X, ICEYE, Capella)~3.1 cm1.55 cm / fringeHighest sensitivity on structures; fast vegetation decorrelation
C-Band (Sentinel-1, RCM)~5.6 cm2.80 cm / fringeBalanced global baseline; strong urban & dry-soil stability
S-Band (NovaSAR / NISAR-S)~9.4 cm4.70 cm / fringeImproved canopy penetration over C-band
L-Band (ALOS-2/4, NISAR-L)~23.6 cm11.80 cm / fringeBest vegetated coherence & large rapid-slip tolerance
P-Band (Biomass)~69.0 cm34.50 cm / fringeForest structure research; limited bandwidth

One 2-pi fringe equals lambda/2 Line-of-Sight displacement (two-way radar path).

Worked Illustration: Phase-to-Displacement Conversion and Aliasing Limit

A C-band (56.0 mm) interferogram at 38° incidence shows a -1.57 rad phase shift over an aquifer, while a mine edge moves 18 mm per pass. We compute LOS motion, vertical subsidence, and aliasing limits.

  1. LOS displacement: (56.0 mm / 4pi) x (-1.57) = 4.456 x (-1.57) = -7.00 mm.
  2. Vertical subsidence (zero horizontal slip): -7.00 / cos(38°) = -7.00 / 0.788 = -8.88 mm.
  3. C-band spatial gradient limit (lambda / 4): 56.0 / 4 = 14.0 mm; the 18 mm step aliases.
  4. L-band (236 mm) gradient limit: 236 / 4 = 59.0 mm, resolving 18 mm slip cleanly.

Calculated Result & Takeaway: The -1.57 rad shift equals -7.00 mm LOS (-8.88 mm vertical), while the 18 mm rapid-slip zone requires L-band (59 mm limit).

InSAR Engineering & SLC Ordering Checklist

  • Order Single Look Complex (SLC) products—never GRD—for interferometry.
  • Keep mode, polarization (VV), and orbital track identical across the stack.
  • Apply precise orbital ephemeris files prior to co-registration.
  • Include ascending and descending tracks when horizontal slip occurs.
  • Stack at least 15–20 SLC scenes for PS-InSAR atmospheric filtering.
  • Mask low-coherence zones (< 0.35) before interpreting displacement.

Frequently Asked Questions

Why must an InSAR stack share the exact same orbital track?

Interferometry requires matching look angles within a tight baseline; mixing tracks destroys phase coherence.

What is the difference between LOS motion and true vertical subsidence?

Single passes only observe motion along the radar beam (LOS); separating vertical and horizontal vectors requires ascending and descending passes.

Can InSAR track structures hidden under dense trees?

Tree foliage scatters X- and C-band phase; L-band radar or corner reflectors help preserve stable coherence.

How does atmospheric water vapor affect single interferograms?

Tropospheric moisture delays microwaves unevenly, creating false 10–30 mm fringes unless mitigated via multi-scene stacking.

Primary References & Standards

  • ESA Copernicus Sentinel-1 InSAR Processing & Precise Orbit Guidelines.
  • CEOS WGCV SAR Interferometry Calibration & Validation Standards.
  • Ferretti, A. et al., InSAR Principles (ESA TM-19).

Related Technical Guides